Care & delivery
Made for the outdoors, prepared with care
Your plaque is made from solid European oak, individually carved, hand-finished and carefully packed. If you choose our matching oak post, it arrives in the same package with a concealed fixing system and straightforward installation instructions.
Caring for oak outdoors
Natural timber will change with the seasons
Oak is durable and full of natural character, but it is a natural material rather than a maintenance-free manufactured surface. A little care will help your plaque age gracefully outdoors.
01
Expect natural change
Sunlight, rain and changing seasons will gradually alter the colour and surface character of oak. Grain, tone and small natural variations are part of the material and make every memorial individual.
02
Keep cleaning gentle
For routine cleaning, remove loose dirt and wipe the surface gently with a soft cloth or brush and clean water. Avoid harsh abrasives or aggressive cleaning methods that could damage the carved surface.
03
Refresh the finish when needed
Each memorial leaves our workshop finished with Osmo UV Protection Oil to help protect the timber while allowing the natural grain to remain visible. Over time the surface can be cleaned and refreshed when it begins to look dry or weathered.
A note about natural oak. The on-screen preview shows the layout of your carving, not the exact grain or colour of the piece of timber you will receive. Those natural differences are part of the finished memorial.
Optional oak post
A matching post with a concealed fixing
If you choose the post option, we prepare the memorial and post as a matched pair. The fixing is hidden behind the plaque, leaving the oak face clean and uninterrupted.
Post specification
Designed to look slender from the front
- Post section
- 50 × 65 mm oak
- Overall length
- 650 mm
- Above ground
- Approx. 400 mm
- Into ground
- Approx. 250 mm
- Mounting face
- 45° across the 65 mm depth
How the concealed fixing works
A stainless M6 bolt passes through the rear of the post and tightens into a threaded insert fitted into the back of the memorial. A separate oak locating dowel keeps the plaque correctly positioned and prevents it rotating around the bolt.
Once tightened, the rear bolt access is finished with an oak plug. From the front, the 50 mm face of the post is all that is seen beneath the memorial.
The threaded insert is fitted only when the optional post is ordered. A memorial ordered without the post is supplied without this fixing.
Installation
Simple to assemble and position
The post is supplied already machined for its matching memorial. A short printed guide will be included with the order, supported by clear photographs of the fixing and finished installation.
01
Locate the plaque
Offer the plaque to the 45° face of the post. The oak dowel locates the two pieces in the correct position and orientation.
02
Secure the fixing
Insert and tighten the supplied M6 bolt from the rear of the post into the threaded insert in the memorial, then fit the oak plug over the access hole.
03
Set the post
Position approximately 250 mm of the post below ground level, leaving around 400 mm visible. Make sure the post is firm and suited to the local ground conditions.
04
Check the final position
Before finishing the installation, check the memorial from the front and side to make sure the post is secure and the plaque sits at the intended angle.

Shown installed
A real example on the matching oak post
This Small Round memorial shows the proportions of the plaque and post in a natural outdoor setting. The concealed fixing keeps the front face clean, with the post centred beneath the plaque.
Delivery
Please allow up to 10 working days for delivery
Each memorial is made individually to order, then checked and securely packed before it leaves our workshop. UK orders are sent using Parcelforce 48 tracked delivery at a flat £11.95 for a single memorial, whether ordered on its own or with the optional matching oak post.
One package. If you choose the optional oak post, the memorial, post and fixing components are packed and sent together.
Dispatch confirmation. Once your order has been dispatched, we will email you to confirm that it is on its way.
Tracking details. Your dispatch email will include the Parcelforce tracking number so you can follow the delivery.